Avago-technologies LSI7202XP-LC Manuel d'utilisateur télécharger pdf

DB11-000049-00

September 2003

Quick Hardware Setup Guide

LSI Logic LSI7202XP-LC

Host Bus Adapter

Thank you for purchasing the LSI7202XP-LC Fibre Channel to

PCI-X Host Bus Adapter (HBA). Please take a few minutes to read

this Quick Hardware Setup Guide before you install the

LSI7202XP-LC. If you need more information about any topic

covered in this guide, please refer to the other documents on the

accompanying LSI Logic HBA compact disk (CD).

Contents of the LSI Logic HBA CD

The LSI Logic HBA CD contains utility programs, device drivers for

various operating systems, and the following documentation:

• LSI Logic Fibre Channel to PCI-X Host Adapters User’s Guide

• LSI Logic Fusion-MPT™ Device Management User’s Guide

• LSI Logic HBA technical product briefs

Technical Support

For assistance installing, conﬁguring, or running the

LSI7202XP-LC

contact LSI Logic Technical Support:

Phone Support: 1-800-633-4545

Web Site: http://www.lsilogic.com/support/index.html

HBA Installation

Caution: Make a backup of your data before changing your system

conﬁguration.

These steps install the LSI7202XP-LC. The following text provides

an explanation of each step.

Step 1: Unpack the HBA

Unpack the LSI7202XP-LC in a static-free environment. Remove

the LSI7202XP-LC from the antistatic bag and inspect it for

damage. If it appears to be damaged, or if any component is

missing, contact LSI Logic or your reseller support representative.

Step 2: Prepare the Computer

Turn off the computer and remove the power cord from the back of

the power supply. Remove the cover from the chassis. Be certain

to disconnect the computer from the power supply and from any

networks before installing the controller card.

Step 3: Install the LSI7202XP-LC

Install the LSI7202XP-LC in a 3.3 V or 5 V PCI slot, as shown in

Figure 1. Press down gently, but ﬁrmly, to seat the controller card

properly in the slot. The bottom edge of the card must be ﬂush with

the slot. Then attach the LSI7202XP-LC to the computer chassis

with the bracket screw. The Fibre Channel to PCI-X Host Adapters

User’s Guide provides detailed instructions for installing and

conﬁguring the LSI7202XP-LC.

Figure 1 Inserting the HBA Board

Step 4: Re-assemble the Computer

Replace the computer cover and connect the power cords.

Step 5: Connect the Fibre Channel Cables to the LSI7202XP-LC

Connect the Fibre Channel cables to the Small Form-factor

Pluggable (SFP) transceivers on the LSI7202XP-LC (Figure 2).

Step Action

1 Unpack the LSI7202XP-LC.

2 Prepare the computer.

3 Install the LSI7202XP-LC in a PCI or PCI-X slot.

4 Re-assemble the computer.

5 Connect the Fibre Channel cables to the LSI7202XP-LC.

6 Power up the computer.

7 Ensure that the HBA is installed properly.

8 Install the operating system device driver.

Bracket Screw

32-Bit PCI Slots

64-Bit PCI Slots

1 2

Résumé du contenu

Page 1 - Host Bus Adapter

Page 2 - Quick Hardware Setup Guide

Quick Hardware Setup Guide DB11-000049-00, September 2003LSI Logic, the LSI Logic logo design, and Fusion-MPT are trademarks or registeredtrademarks o

Commentaires sur ces manuels

Pas de commentaire

Avago-technologies LSI7202XP-LC Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Avago-technologies LSI7202XP-LC. Avago Technologies LSI7202XP-LC User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Avago-technologies LSI7202XP-LC