Avago-technologies LSI SAS 3801X Manuel d'utilisateur
Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Avago-technologies LSI SAS 3801X. Avago Technologies LSI SAS 3801X User Manual Manuel d'utilisatio
- Page / 2
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
80- 00147- 01
Thank you for purchasing the LSISAS3801X PCI-X to 3.0 Gbit/s
Serial Attached SCSI (SAS) host adapter. Please take a few minutes
to read this Quick Installation Guide before you install the
LSISAS3801X.
If you need more information about any topic covered in this guide,
please refer to the other documents on the accompanying LSI Serial
Attached SCSI Device Drivers and Utilities CD.
CONTENTS OF LSI SERIAL ATTACHED SCSI
DEVICE DRIVERS AND UTILITIES CD
The LSI host adapter CD contains utility programs, device drivers for
various operating systems, and the following LSI documentation:
• Serial Attached SCSI (SAS) to PCI-X Host Adapters User’s Guide
• Fusion-MPT™ Device Management User’s Guide
• Host adapter technical product briefs
QUICK HOST ADAPTER INSTALLATION
To install the LSISAS3801X host adapter, follow these steps:
Step 1 Unpack the host adapter and inspect it for damage.
Unpack the host adapter in a static-free environment.
Remove the host adapter from the antistatic bag and
inspect it for damage. If it appears to be damaged, or if
any component is missing, contact LSI or your reseller
support representative.
Step 2 Prepare the computer.
Turn off the computer and remove the power cord from
the back of the power supply. Remove the cover from the
chassis.
Step 3 Insert the LSISAS3801X in an available PCI/PCI-X
slot.
Locate an empty PCI/PCI-X slot. Remove the blank
bracket panel on the back of the computer that is aligned
with the PCI/PCI-X slot you have selected. Save the
bracket screw when present.
Align the host adapter with a PCI/PCI-X slot. Press down
gently but firmly to properly seat the host adapter in the
slot. The following figure illustrates how to insert the host
adapter in a PCI/PCI-X slot.
Note
: The LSISAS3801X is keyed for a 3.3 V slot. The keying
of edge connector J1 prevents the card from being
installed in a 5 V slot.
Step 4 Secure the bracket to the system chassis.
Install the bracket screw, when present, or engage the
system’s retention mechanism to secure the host
adapter to the system’s chassis.
Note
: The host adapter shape, size, and locations of
components may vary from this illustration.
Make a backup of your data before changing your
system configuration.
!
CAUTION
Be certain to disconnect the computer from the power
supply and from any networks before installing the
controller card.
!
CAUTION
32-Bit Slots
64-Bit Slots
(3.3 V Only)
(3.3 V Only)
Edge of
Host Board
Bracket
Press
SFF-8088
Mini-SAS
Cables and
Connectors
Screw
Two
Here
Press
Here
LSISAS3801X PCI-X to 3.0 Gbit/s Serial
Attached SCSI (SAS) Host Adapter
Quick Installation Guide
1
2
Résumé du contenu
Page 1 - Quick Installation Guide
80- 00147- 01Thank you for purchasing the LSISAS3801X PCI-X to 3.0 Gbit/s Serial Attached SCSI (SAS) host adapter. Please take a few minutes to read t
Page 2 - TECHNICAL SUPPORT
DB11-000081-00, Version 1.0, November 2006Find a list of LSI Logic Corporation’s U.S. distributors, international distributors, sales offices, and des
Produits connexes et manuels pour Matériel Avago-technologies LSI SAS 3801X
(12 pages)© 2020, manymanuals.fr. Tous droits réservés | 1.296 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels