Avago-technologies MegaRAID SATA 300-8X Manuel d'utilisateur télécharger pdf

This Quick Installation Guide explains how to install the LSI

Logic MegaRAID LSIiBBU01 Intelligent Battery Backup Unit

on a MegaRAID SATA 300 PCI-X to Serial ATA storage

adapter. The LSIiBBU01 protects the cached data on the

MegaRAID storage adapter by providing backup power if the

main AC power source fails or is interrupted.

The LSIiBBU01 is compliant with the Smart Battery Data

Speciﬁcation, which relieves the host system from the

responsibility of communicating battery information and

charging the battery.

You can view information about the LSIiBBU01, such as

battery temperature and voltage, in the BIOS Conﬁguration

Utility and the WebBIOS Conﬁguration Utility. Battery

charging and recharging takes place automatically.

The following sections describe how to install the LSIiBBU01

and list the basic hardware speciﬁcations for it.

Installing the LSIiBBU01 on the Storage

Adapter

Caution: Electrostatic discharge can damage the

LSIiBBU01 and the MegaRAID SATA 300 storage

adapter. Be sure to install the LSIiBBU01 at an

ESD-safe workstation that meets the

requirements of EIA-625 – “Requirements For

Handling Electrostatic Discharge Sensitive

Devices.” When you install the LSIiBBU01, follow

the ESD-recommended practices in the latest

revision of IPC-A-610.

If the MegaRAID SATA 300 storage adapter is already

installed in a computer, follow these steps to remove it before

you install the LSIiBBU01:

Step 1 Shut down the computer, turn off the power, and

unplug the power cord(s).

Step 2 Remove the cover from the computer according

to the instructions in the system user’s manual,

so you can access the PCI-X slots.

Step 3 Ground yourself before touching the MegaRAID

SATA 300 storage adapter.

Step 4 Unplug all cables from the MegaRAID SATA 300

storage adapter, remove the screw attaching the

bracket to the computer case, and carefully

remove the storage adapter from the slot.

Step 5 Place the storage adapter on a ﬂat, clean, static-

free surface, and continue with the next section.

Follow these steps to install the LSIiBBU01 on the

MegaRAID SATA 300 storage adapter:

Step 1 Ground yourself, and remove the LSIiBBU01 from

its package.

Figure 1 shows top and bottom views of the

LSIiBBU01. Note the J2 and J14 connectors and

the holes for the screws that attach the

LSIiBBU01 to the MegaRAID SATA 300 storage

adapter.

Figure 1 LSIiBBU01 Intelligent Battery Backup

Unit

Step 2 Insert the battery pack harness connector (at the

end of the colored wires) into the J2 connector on

the bottom side of the LSIiBBU01.

Step 3 Place the MegaRAID SATA 300 storage adapter

front-side-up on a ﬂat, clean, static-free surface.

Step 4 Hold the LSIiBBU01 so that the battery side is up

and the J14 connector lines up with the J3

connector on the MegaRAID SATA 300 storage

adapter, as shown in Figure 2.

Bottom View

Top View

J14

MegaRAID

LSIiBBU01 Battery

Backup Unit

Quick Installation Guide

MR_LSIiBBU01_QuickIG.fm Page 1 Thursday, October 14, 2004 4:22 PM

1 2

Résumé du contenu

Page 1 - Backup Unit

®This Quick Installation Guide explains how to install the LSILogic MegaRAID LSIiBBU01 Intelligent Battery Backup Uniton a MegaRAID SATA 300 PCI-X to

Page 2

Order No. S14079 P/N: 80-00055-01DB11-000061-00, Version 1.0, October 2004Find a list of LSI Logic Corporation’s U.S. distributors, international dist

Plus de documents pour Matériel Avago-technologies MegaRAID SATA 300-8X

Voir le document Avago-technologies MegaRAID SATA 300-8X Manuel d'utilisateur

Avago-technologies MegaRAID SATA 300-8X Manuel d'utilisateur (3 pages)

Commentaires sur ces manuels

Pas de commentaire

Avago-technologies MegaRAID SATA 300-8X Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Avago-technologies MegaRAID SATA 300-8X. Avago Technologies MegaRAID SATA 300-8X User Manual Manuel d'utilisatio

Résumé du contenu

Plus de documents pour Matériel Avago-technologies MegaRAID SATA 300-8X

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Avago-technologies MegaRAID SATA 300-8X